How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.     

基于能量原理的粘滞阻尼器附加阻尼系数分配方法研究

以线性粘滞阻尼器加固剪切型规则框架结构为研究对象，基于能量原理提出附加阻尼系数正比于层间位移平方的分配方式。以六层和十二层钢筋混凝土框架为例，以确保结构在中震时保持弹性状态为设计目标，分别采用附加阻尼系数正比于层间位移平方的分配方式以及现有的分配方式，对结构进行消能减震设计。计算结果表明:有控结构均满足中震不坏的要求，层间位移角限值均未超过1/550，减震效果良好；附加阻尼系数正比于层间位移平方的分配方式得出的总阻尼系数最小，为最经济的设计结果。     

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.     

Temporal-Spatial Variation of Surface Suspended Matter and Controlling Factors in the Inner Shelf of the East China Sea in Winter

Based on the observed surface suspended matter in the East China Sea in February 2007 and June 2015, an empirical model was established using L1 b's band 4 data to retrieve surface suspended matter from the Moderate Resolution Imagine Spectroradiometer Terra imagery. The squared correlation coefficient is 0.8358, and the root mean square error is 0.4285 mg L-1. The model reflects the distribution characteristics of surface suspended matter in the inner shelf of the East China Sea. In this paper, the satellite images of the study area were retrieved in January from 2001 to 2015, and the monthly distribution of surface suspended matter were obtained. The inter-annual distribution of the study area is similar, and the concentration of surface suspended matter is higher near the shore than offshore. A large amount of surface suspended matter is transported southeast under the influence of Zhejiang and Fujian coastal current and Taiwan warm current. Only a small amount of surface suspension can reach the Kuroshio area. The surface suspended matter concentration changes obviously near the estuary because of the effect of differences in the flux of the Yangtze River. Meanwhile, winter monsoon, temperature front, El Ni?o events, and other factors affect the distribution of surface suspended matter in 100 m isobath to coastal water but minimally influence the distribution in 100 m isobath to deep sea.     

套管锻铣开窗技术在土耳其贝帕扎里碱矿中的应用

土耳其贝帕扎里碱矿在矿区边缘的碱层出现埋深起伏大、厚度变化大、易尖灭、易涌水等情况，这些特殊的地质情况导致水溶开采钻井过程中同一组井的套管最终下入到了不同的层位，或是原先下入的矿层不稳定，易坍塌。为了解决以上问题而引入了套管锻铣开窗技术。该技术可以将老井眼中已被套管封闭的上部碱层暴露出来形成新的采矿通道，从而提高矿区采收率。先后在14口老井眼中完成了套管锻铣作业，均达到了预期效果。本文介绍了套管锻铣器的工作原理，并以H066井组为例，详细阐述了套管锻铣开窗工艺技术。工程实践表明，套管锻铣开窗技术对于换层开采、钻井处理事故、事故井恢复性生产等方面具有一定的效果，具有减少钻井工期、降低施工成本、延长老井使用寿命、提高矿藏产量等优点，有广阔的应用前景。     

Application of Avaatech X-ray fluorescence core-scanning in Sr/Ca analysis of speleothems

Application of X-ray fluorescence core-scanning(XRF-CS) on both marine and lake sediments has achieved remarkable results. However, its application has not been widely extended to the research on speleothems. In this study, we measure the Sr abundance and the Sr/Ca ratios of three stalagmites(two aragonite stalagmites, one calcite stalagmite) using the state-of-the-art fourth-generation Avaatech high-resolution XRF core scanner. Through comparisons among different scan paths and among different scan resolutions, as well as comparisons with inductively coupled plasma optical emission spectrometer(ICP-OES), Itrax XRF, and Artax XRF results, we confirm that the Avaatech XRF core scanner could precisely, quickly, and nondestructively analyze the high-resolution Sr abundance of speleothems. Furthermore, we combine the stalagmite δ~(18)O records to explore the paleoclimatic significance of the measured stalagmite Sr/Ca.     

渭河盆地地温场分布规律及其控制因素

本文以渭河盆地地温场为研究对象,在收集补充新地热井资料及分析测试样品的基础上,通过盆地深部结构、构造特征、地温场特征、热储层特征、地热资源量等分析,建立了盆地不同岩性岩石热导率与深度关系图版,确定了盆地地温场变化规律及地热田控制因素,提出了渭河盆地地热田形成模式。评价了盆地地热资源有利区,为盆地后续的开发利用提供了理论支持。研究认为渭河盆地热地温梯度分布在2.34～5.85℃/100m之间,平均地温梯度为3.50℃/100m,代表性大地热流68.33mw/m~2,地温梯度及不同深度地层温度具有东高西低、南高北低的特点。热导率总体上具有随深度的增加,逐渐增大的规律,热导率随深度增加主要受压实程度增强控制。相同深度条件下泥岩热导率最低,砂岩热导率居中、白云岩热导率最高。渭河盆地主要为层状地热田,盆地内地热通过热传导及热对流两种方式进行传递,以热传导为主。渭河盆地地热资源丰富,热储层可分为三种类型:①新生界砂岩孔隙型;②下古生界碳酸盐岩岩溶型;③断裂型。渭河盆地地热资源有利区主要分布于西安凹陷、固市凹陷。盆地地温场及地热田分布与莫霍面、软流圈上隆、岩石圈厚度减薄的深部背景密切相关,主要受地热传导和深大断裂热对流控制,是岩石圈深部结构、盆地构造、基底岩性、储盖组合等多因素共同作用下形成的。最后结合当前渭河盆地地热资源开发利用现状及存在问题,提出了地热开发利用建议。     

黄河干流头道拐河段凌汛期小流量过程变化及其影响因素研究

黄河干流内蒙古段河道冬季流凌封河期， 河道水量除一部分转化为冰量外， 很大一部分转化为槽蓄水量而贮存在河道中， 导致下游头道拐河段出现小流量过程， 上游河道流量转化为槽蓄水量和贮存的冰量越大， 小流量持续时间越长， 开河期发生凌汛洪水风险越高。通过对1998 - 2016年头道拐站凌讯期流量变化过程分析， 重新界定了小流量上限阈值为330 m³·s^-1， 并且以此值为标准进行小流量过程研究， 分别采用R/S极差分析法、 Fourier变换分析法对近年来小流量过程变化特征进行分析； 结合非线性概率Logit模型和Probit模型对小流量过程的影响因素进行讨论。结果表明： 小流量持续天数变化呈现缩短趋势； 同时， 小流量过程与上游相对来水之间变化关系显著且过程同步， 而滞后于河道槽蓄水量变化过程； 通过Logit模型和Probit模型分析各影响因素变化时相应小流量持续时间变化的响应概率大小， 明确河道冰流量是小流量过程第一影响因素， 气温条件是小流量过程的决定因素， 首封位置和相对来水量是小流量过程重要影响因素。     

Extraction of Lithium from Salt Lake Brine using N523-TBP Mixture System

In this work,problems encountered by tri-butyl phosphate( TBP) in the industrialization of lithium extraction from salt lake brine were discussed in detail. The behavior of N,N-bi-( 2-ethylhexyl) acetamide( N523) during lithium extraction was investigated,and its disadvantages were analyzed in the view of practical application. An N523-TBP mixture extraction system was proposed to alleviate or avoid the defects that N523 and TBP met when they were used separately. The optimal composition of this mixture extraction system was determined to be 20% N523-30% TBP-50% kerosene.The effects of brine acidity,Fe/Li molarity ratio,phase ratio and chloride ion concentration on lithium extraction efficiency were discussed. The operation conditions in single-stage extraction were optimized as brine acidity = 0. 05 mol/L,Fe/Li molarity ratio = 1. 3,and phase ratio = 2. The high concentration of chloride ions in brine was beneficial for the extraction of lithium. The structure of the extracted complex was proposed as( LiFeCl_4·n N523·m TBP)·( 2-n) N523·( 2-m) TBP( m + n = 2) by chemical analysis and slope-fitting methods. The extraction thermodynamic functions were calculated preliminarily,and the results suggested that the extraction process was an exothermic( ΔH 0) and spontaneous( ΔG 0) reaction,and the degree of disorder increased( ΔS 0) during the extraction process. This work will give some guidance to the lithium industry of Qinghai in both the fundamental theory and practical application.